Tag Archives: laney

Music gear

A nice trick to lower the volume of your Laney VH100R

2 Comments

I’ll never be grateful enough to the guy who wrote this great tip in some forum (I can’t remember where, unfortunately). I really like my Laney VH100R, it has a wonderful sound in my opinion. And I enjoy the separate FX loops per each channel, that’s just brilliant.

However, as we all know, the Laney is a LOUD amp. So loud that in a typical live situation in a small club it’s basically impossible to play it with volume past 2-3/10. Which I find utterly annoying, as the power tubes don’t get saturated this way and you basically don’t really use them.
So one would like to be able to control the output of this beast, to set the Volume knobs past those ridiculous values, without taking out power tubes or using attenuators.

And here is the trick: in the rear panel there’s a general FX loop, called “Insert”. Now set the switch to Insert (the middle position): the knob right next to it (called “Return level”) will now control the overall volume of the amp directly from the preamp 🙂
This means that the power tubes really need to be pushed more in order to give the same volume! So you get saturation even at bedroom levels 😀

As I wrote at the beginning, I’ll never be grateful enough to that guy, this is just brilliant!

Music gear

Is it always necessary to replace the stock pickups in a guitar?

Leave a comment

I am writing this first post to share some thoughts about a rather hot topic for guitar players.

I own an ESP LTD GL-256 (one of the George Lynch signature models), and I am really happy with it. It feels great, and it is a very resonant instrument when played unplugged.

When plugged into just a pedal board, or into a 100W tube amp, it sounds *amazing*. I really mean it: tons of sustain, good definition and clarity. Both with the bridge humbucker and the neck single coil (the bridge single coil still sounds a bit meh). And now comes the funny part: this is a Vietnamese instrument, with no SD Pearly Gates as the ESP GL-56 but mounting the stock pickups LH-150 and LS-120.

Usually people bash these poor tools claiming that they are “lifeless, useless pickups with no personality” etc etc. Now, I played my axe side by side with my Ibanez RG with SD Full Shred, through my Laney VH100R…and guess what? No substantial differences. Just some nuances (like the almost “vocal” sound of the Full Shred on the high notes), but nothing so important to justify a pickup replacement.

Though I changed plenty of pickups in my instruments during the years, I still believe that the tone is made by your fingers and by your amp. And that replacing an unbranded stock pickup with a Duncan or a Dimarzio or a Bare Knuckle is mostly a matter of personal taste, not of necessity.

I believe that in general, the stock pickups in decently made guitars like my GL-256 are totally honest and useful pieces of equipment. Those who replace them with 80 euros pickups without even testing the instrument as it comes stock, should really work more on their chops and on equalizing correctly their amps.

It is not the pickups ot have personality, it is not the guitar, it is the musician. My bridge humbucker has a metal cover, and I’m pretty sure that these people would tell me “ah, sounds so good…did you put an SD Custom here?” 😀

EDIT: the other evening, after our weekly Dokken practice, my friend asked me if my bridge pick up was an SD Pearly Gates. QED 🙂